My Cart
My Account

StopShot Controller

As low as $299.00
In stock
SKU SS_60V_CTRL

The StopShot controller is a high speed photography controller - it has both microphone and sensor inputs, and 3 outputs to control loads like cameras, flashes, water valves, relays, etc. Use this controller to capture events that are too fast to capture with traditional methods - there are various sensor available for use with the StopShot controller.

The StopShot Controller includes:
- StopShot Controller
- 12V 1A DC Power Supply

- +
Features

About the StopShot - High Speed Photography Controller

StopShot is a flexible timing module made specifically for taking high speed photographs. With StopShot you can create photos like you see below without having a degree in electrical engineering. All you need is a camera with the BULB exposure setting, an external flash, and the StopShot electronic trigger module. With StopShot you can use a variety of triggers to fire up to three independent electronic devices (flashes, cameras, valves, etc.) at virtually any delay you choose. You can even set it up to do time lapse photography. Follow the How To links below for more details.

 

Strawberry n Cream - Copyright 2012 Amer Pederson
Sound Activated
StopShot Water Drop Kit
Water Drops
Photograph Insects in Flight
Insects In Flight
Ballistics Photography with StopShot
Ballistics
Timelapse with StopShot
Time Lapse
Bristlecone Star Trails Copyright Roy Dunn
Star Trails

 

StopShot Features:

StopShot Controller

  • Fully programmable 3 channel camera trigger for high speed photography.
  • Trigger up to 3 external devices including: flashes, cameras, water valves, solenoids, or any other low voltage electronic device.
  • Several flashes can be fired simultaneously from one Trigger - check out the Flash Splitter.
  • Easy to read 4x20 LCD Display with adjustable back-lighting.
  • StopShot will save your settings between power cycles. No lost setup info.
  • Programmable to perform sequential triggering for complicated triggering sequences.
  • Timers can be adjusted to be manual (on button press), sequential, or event based.
  • Timers can be configured to ignore trigger events for a programmable amount of time (blanking time).
  • Time Lapse Photography Mode.
  • Sound activated triggering. Just add the microphone.
  • Adjustable gain for microphone or analog sensors.
  • Sensor input will accept digital or analog input.
  • Laser power can be turned off after trigger to keep laser light out of photos.
  • Long exposure control of shutter for night-time or astro-photography.
  • One touch Shutter lag measurement capability.
  • Each trigger can generate multiple pulses, great for multiple drops or multiple exposures.
  • Camera "Sync" mode to make synchronizing the flash with your camera's shutter easier.
  • Up to 10 presets for user stored settings. Give your setup's custom names and store them for later use.
  • Auto Increment - A programmable auto increment time increases trigger delay for every event.
  • Sequential mode timeout for taking pictures with an unattended camera.
  • Simple 4 button interface.
  • Durable extruded aluminum housing.

 

Reviews
Write Your Own Review
You're reviewing:StopShot Controller
Your Rating
FAQs

Top Customer Questions and Answers (FAQ)

How do I choose between the laser and IR transmitters?
Choose the transmitter type for your beam kit based on your intended application. The laser sensors are best suited for outdoor work like insects and birds in flight. They have a range of at least 10m, perform very well in bright sunlight, and are visible -- making them easier to align. StopShot has the capability to turn off the lasers before the image is captured so there is no need to worry about getting red dots in your photographs. The IR sensor is best suited for work like water drops and ballistics. It has a wider triggering window so aligning the sensors for small objects is much easier. IR sensors are also better suited for water drops and splashes as the lasers often go right through clear liquids without causing a trigger.
Can I fire my camera shutter with StopShot?
Absolutely, but you will need a shutter interface cable to fire your camera. This cable goes between the StopShot output and the camera remote shutter port. Not all applications require camera control though. If you plan to take images of insects and birds in flight with StopShot then you will need camera control. If you plan to do more traditional high speed photography (taking photos in a darkened room and controlling the flash with StopShot) then you do not need a shutter cable. A good example of this is water drop or popping ballon photography. If your event happens faster than your camera can respond it will need to be photographed by firing the flash and not the camera.
How do I connect my StopShot to multiple flashes?
You can connect multiple flashes to StopShot using RCA Y Cables or our 5-Way Flash Splitter.
Have additional questions about ordering and shipping?
Visit our general FAQ page.
 
Specs

Electrical Specification Summary

Specifications MIN NOM MAX UNITS
Operating Temperature -20 25 60 C
Input Voltage 6 12 16 Vdc
Input Current - No Sensors Connected (12Vdc in) - 75 100 mAdc
Input Current - IR Sensor Connected - 150 200 mAdc
Output Current Sink - - 1 Adc
Sensor Supply Output Voltage 4.0 4.5 5.0 Vdc
Sensor Supply Output Current - - 100 mAdc
Max Voltage on Trigger Out Port (Steady State) - - 40 Vdc
Timer Tolerance @ 25C   0.005   %
Support

StopShot Resources

Owner's Manual (select language)

Owner's Manual (PDF)

StopShot in the News

StopShot in Popular Photography
How To

+
StopShot Controller
+
3.5mm Cable
+
Tripod Mount
+
IR Transmitter
+
Beam Receiver
+
AC Adapter 12V 1A

Accessories

StopShot Accessories:


You May Also Be Interested In: