Rotary Table Spacer Kit
This hardware kit includes everything you need to mount an Arca clamp or ball head to your Cognisys Turntable.
The spacer has holes at 30mm and 45mm apart to allow two #10-24 screws to go through your Arca Clamp and into the threaded holes in the turntable. See the example image above.
The kit also includes a 3/8-16 set screw to mount a ball head to the top of the turntable. See the example image above.
The kit contains:
1 - Rotary Table Spacer (30 and 45mm Hole Spacing).
2 - #10-24 x 3/4" Stainless Steel Flat Head Bolts
1 - 3/8-16 x 3/4" Stainless Steel Set Screw
1 - 1/8" Allen Key (for #10-24) Bolts
Spacer is made from cast acrylic.
Write Your Own Review