My Cart
My Account

StopShot Studio 3 Valve Water Drop Kit

$879.00
Rating:
100 % of 100
In stock
SKU SSS_3WVK

The StopShot Studio Water Drop Kit is the ultimate water drop setup. It includes everything you need to create water drop collisions from three different colored liquids. It comes with all of the water valves, fittings and electrical connections required. It also includes the cables to connect two flashes that are equipped with pc sync connections. The StopShot Studio is fully controlled by your computer for easy configuration and useability.

A fixture to hold up the water valves will be required. You can purchase or build one.

This kit Includes:
1 x StopShot Studio Controller
1 x AC adapter - US, EU, UK or AUS (choose below)
3 x High Precision Water Valves with Nozzles
3 x Mariotte Siphons
3 x Siphon Extension Kits
3 x Water Valve Mounting Brackets
2 x RCA Cables and PC to RCA Adapters to control 2 flashes
1 x 3 Valve Power Supply
1 x Triple RCA Cable
1 x Mini Beam Sensor with mounting bar and 3.5 mm cable

- +
Features

The StopShot Studio - High Speed Photography Controller

StopShot Studio is an expanded version of our StopShot high speed photography controller, the user interface for the StopShot Studio is your computer (either MAC or PC). The StopShot Studio features 12 outputs, 2 sensor inputs, a microphone input and a start button. This controller was specifically designed for those who want to have the capability to control many outputs. A good example are the photographers who want to get crazy with lots of water valves for some over the top water drop shots. Currently these photographers need to daisy chain two StopShot controllers to get 6 outputs - not anymore! Like the standard StopShot the Studio version is extremely flexible. You can get a feel for this flexibility by looking at some screen shots of the StopShot Studio Software you can also download the StopShot Studio control software from the support tab above.

StopShot Studio Controller

Control StopShot Studio via USB

Whether you use a PC or a Mac you can use your computer to control the StopShot Studio. The computer removes the limitation of a small display, making the StopShot Studio much easier to configure. The computer software features tabs specifically for water drops, ballistics, time lapse as well as a completely configurable advanced tab. After you configure the StopShot Studio you can verify your results by clicking over to the plot tab to see your results graphically. Configurations can be saved to a file for easy recovery later. StopShot Studio is completely backwards compatible with all of our original StopShot accessories. You can even program a configuration and then disconnect it from your computer and run it remotely.

StopShot Studio has a dedicated tab just for water drop photography. See below for a screen shot. Just choose the number of water valves, flashes and whether or not you want to control your camera automatically and the computer interface will tell you how to connect everything as well as give you options for the timing control of each.


StopShot Studio Features

  • 12 completely independent fully configurable outputs
  • 2 sensor inputs - Allows cross beam functionality with standard beam sensors
  • Microphone input for sound triggering
  • Compatible with all of current StopShot sensors and accessories.
  • LED indicators for power as well as each output
  • USB mini connector for complete computer control (Mac or PC)
  • Configurations can be saved off and recalled from files.
  • Purpose specific tabs for common high speed and time lapse triggering needs
  • All of the parameters feature tool tips to speed up the learning curve
  • Plot window for reviewing your configurations before running
  • Output disable to prevent outputs from triggering during configuration (useful for testing a setup)
  • Measurement tab to allow for measurement of projectile speed and camera shutter lag
  • Multi Out feature allows firing of multiple flashes without the use of Y cables or flash splitters
  • Software controllable gain for microphone and sensor inputs
  • Includes tab specifically for bulb ramping (not compatible with all cameras)
  • Complex triggering options including multi group and loop-back features
  • Ships with many common setup presets including 1, 2 and 3 drop collisions
  • Events can be started from the computer or from the start button on the controller
  • Quick save and recall to allow you to experiment with settings but still get back to a known good point.
Water Drop Collision Created with StopShot Studio
Reviews 4
Write Your Own Review
You're reviewing:StopShot Studio 3 Valve Water Drop Kit
Your Rating
FAQs

Top Customer Questions and Answers (FAQ)

Is it OK to use other fluids in the system other than water?
Yes, a big part of water drop photography is water chemistry. Adding coloring or thickeners to the water is not a problem and often adds a lot to the end results. Using other liquids like milk is also fine but a good thorough flushing is recommended after use. We would however recommend you stay away from solvents with any type VOC's.
Do you have any water drop tutorials or videos?
Yes, you can find 5 pages of water drop tutorials starting here. The tutorials start off with basics and end with very advanced 3 valve techniques. A link to the next tutorial can be found at the bottom of the previous tutorial page. You can also find videos on the StopShot Water Drop Kit here.
Can I automate the entire process and have StopShot fire the camera as well as the flash and water drops?
Absolutely, but you will need a shutter interface cable to fire your camera. This cable goes between the StopShot output and the camera remote shutter port. For water drop photography we generally recommend you start off in a darkened room with StopShot firing the water valve and flashes and controlling the camera manually in bulb mode. Setup without the camera is much easier and will let you get up and running taking images of water drops much quicker. Once you understand the timing and settings of StopShot add controlling the camera into the mix.
How do I connect my StopShot Studio to multiple flashes?
Since StopShot Studio has 12 outputs the easiest way to connect it multiple flashes is just to connect each flash to its own output using a RCA Patch cable and PC to RCA adapter cable. The flashes can then all be controlled using the same settings in the StopShot Studio Control Software - just tell it how many flashes you are using.
My water valve has become clogged or has a slow leak - what should I do?
If your valve develops a slow leak or the slow becomes restricted it likely just needs a good cleaning. Try purging the water valve by pressing the purge button in the StopShot Studio control software, if this doesn't work you can find tear down and cleaning instructions here.
Have additional questions about ordering and shipping?
Visit our general FAQ page.
Specs

StopShot Studio Electrical Specifications

Specifications MIN NOM MAX UNITS
Operating Temperature -20 25 60 C
Input Voltage 6 12 16 Vdc
Input Current - No Sensors Connected (12Vdc in) - 120 - mAdc
Input Current - IR Sensor Connected - 175 - mAdc
Output Current Sink - - 1 Adc
Sensor Supply Output Voltage 4.0 4.5 5.0 Vdc
Sensor Supply Output Current - - 100 mAdc
Max Voltage on Trigger Out Port - - 40 Vdc
Support

Owner's Manual

Owner's Manual (PDF)

StopShot Studio Computer App

Scout PIR Configuratoin Software Downlaod (Mac) Scout PIR Configuratoin Software Downlaod (PC)

Windows - StopShot Studio Software Notes

The StopShot Studio Software requires the FTDI VCP USB Drivers to operate properly. Generally these are automatically installed by Windows but if you need to download and install them manually you can find them here:
http://www.ftdichip.com/Drivers/VCP.htm

The StopShot Studio Software is written in Java, and you will need to make certain you have Oracle's Java installed. The StopShot Studio program will let you know if you need to update your version of Java. You can find the latest version here:
http://java.com/download

Mac - StopShot Studio Software Notes

Compatibility: The StopShot Studio Software is compatible with Mac OS X version 10.7.3 (Lion) but we recommend OS X 10.9 or newer.

The StopShot Studio Software is written in Java, and you will need to make certain you have Oracle's Java installed. You can find the latest version here:
http://java.com/download

Trouble Communicating with your Mac?

If the StopShot Studio Software installs but will not communicate with the controller (the connected light is red) please follow the steps below:

Start a terminal window (under Launch Pad). It’s best to copy-paste these commands.
cd /Library/Extensions
sudo mv D2xxHelper.kext D2xxHelper.disabled
sudo mv FTDIUSBSerialDriver.kext FTDIUSBSerialDriver.disabled

The “sudo” command will ask for your login password (you won’t be able to see it while you type it).

Reboot your computer after this and StopShot Studio should be up and running!

How To

+
Shutter Interface Cable (RCA)
+
PC to RCA Adapter Cable
+
Hot Shoe Adapter
+
RCA Cable
+
Water Valve - High Precision
+
3 Valve Power Supply
+
USB Cable
+
3.5mm Cable
+
Mini Beam Sensor
+
StopShot Studio Controller

Please Note: Connections will vary depending on Configuration.

Accessories

3-Valve Water Drop Kit Accessories:


You May Also Be Interested In: