StackShot 3X Virtual Object Creation Kit
As low as $1,269.00
This kit includes everything you need to get started creating 3D virtual objects. Creating virtual objects is normally a very time consuming task, The StackShot 3X Virtual Object Kit enables you to automate the process. Included is all of the hardware required to do Stack - Rotate - Stack tasks. The kit includes the following:</p (1) - StackShot 3X Controller
(1) - Stepper Motor Enabled Standard or Length Macro Rail (select below)
(1) - Cognisys Rotary Table
(2) - Locking motor cable (2m)
(1) - 2A AC Adapter
(2) - 3/8"-16 to 1/4"-20 threaded adapter
(1) - Neoprene Storage bag for rotary table
You will also need a shutter interface cable to control your camera from StackShot 3X. Choose below.
If you already have a shutter cable from StackShot or StopShot it will also work with the StackShot 3X.
|Input Current (12Vdc in)||-||150||6000||mAdc|
|Input Current–Power-saving modes active||-||50||-||mAdc|
|Shutter Output Current Sink||-||-||1||Adc|
• ARM Processor
• 3.5” color TFT LCD capacitive touch screen display – great in direct sunlight!
• Dual shutter outputs, one which includes half-press/full-press functionality
• Remote trigger input
• All outputs are open drain (Can be used for Flash Trigger or Shutter Trigger)
• Simultaneous 3-axis motion control (6A DC power supply or battery required)
• USB for control and reprogramming
• Wireless connectivity: 802.11a/b/g/n 2.4GHz